Description

This design is intended for a light decal on a dark background. It can also be made in any size – please contact me if you would like a custom size.

Mounting instructions
The surface where you apply the vinyl must be dry, clean, and smooth. Clean the surface with denatured alcohol; for windows you can use window cleaner. The temperature during installation should be at least 10°C (50°F) for the decal to adhere properly. Also make sure the installation is not done in direct sunlight.

Rub the decal with a credit card or similar tool so the vinyl releases from the backing and sticks to the transfer tape when you remove it. Remove the paper backing. Place the vinyl where you want it. Rub the decal firmly with a credit card or similar tool so it adheres properly. Carefully peel off the transfer tape. If the decal comes off with the tape, rub it a bit more. Remove the transfer tape at a 180° angle.

Double-check that all parts of the design have transferred so nothing is left behind. The adhesive cures fully after two weeks, so it’s best to avoid washing the decal before then. After that, washing with a pressure washer is usually fine, but do not aim the nozzle directly at the decal.

Please follow the instructions carefully. Some decals have very thin lines, and it is extremely important that the surface is completely clean and that you rub the decal firmly—otherwise it may not stay attached for long.